- Anti-caking agents prevent caking by absorbing moisture or coating particles.
- Common agents include silicon dioxide, calcium silicate, and various ferrocyanides.
- Silicon dioxide is generally considered safe for human consumption within regulatory limits.
- The choice of agent impacts product flowability, stability, and consumer perception.
- Regulatory bodies establish maximum usage levels for anti-caking agents in food.
Understanding Anti-Caking Agents in Food Production
Silicon dioxide is added to food mainly as an anti-caking agent, to stop powdered or granulated ingredients from clumping. It absorbs excess moisture and coats particles, so products like salt, spices and dairy powders stay free-flowing and consistent in texture.
What are Anti-Caking Agents?
Anti-caking agents are food additives designed to prevent powdered and granulated food products from clumping. They maintain product quality by ensuring consistent texture, appearance and flowability during processing, packaging and storage. In UK and EU law, “anti-caking agent” is also a named functional class, so the term has a fixed regulatory meaning as well as a technical one.
Why Are Anti-Caking Agents Used in Food?
The primary function is to absorb moisture or coat individual particles, hindering the formation of liquid bridges that cause caking. When humidity rises, water collects at the contact points between particles and dissolves a little of their surface. As it dries, those bridges harden into lumps.
A free-flowing powder doses accurately through filling heads, blends evenly and pours cleanly from the finished pack.
How moisture turns powder into lumps
Raise the humidity and watch water gather where particles touch. Run a full cycle to see what happens when it dries, then try again with an anti-caking agent.
No anti-caking agent: as humidity rises, water collects where particles touch and dissolves a little of their surface. When it dries, those liquid bridges harden into solid lumps.
Moisture absorber (e.g. E551 silicon dioxide): a porous absorber takes up water before it can gather at contact points. Bridges only start to form once its capacity is used up.
Particle coating (e.g. E470b magnesium stearate): a fine water-repellent layer sits on each particle, so moisture beads up instead of bridging to its neighbours.
How Anti-Caking Agents Differ from Related Additives
Anti-caking agents change how particles behave, not what the food is. Sodium bicarbonate (E500(ii)) is a raising agent that releases gas, and humectants such as glycerol do the opposite job, holding water in. Some substances belong to more than one class: calcium carbonate (E170) can also act as a colour or firming agent. Our Ingredient Functionalities Guide sets out the other classes.
Choosing an Anti-Caking Agent: Selection Criteria
Check these five things before you specify an agent:
- Authorisation: the agent is permitted in your food category, at or below the maximum level.
- Mechanism: moisture absorption suits hygroscopic powders. Particle coating suits fats and sticky crystals.
- Dose: how much agent you need to get the flow you want.
- Sensory impact: effects on taste, dissolution and clarity in solution.
- Label perception: how the E-number reads to your customers.
Which anti-caking agent suits your product?
Tell us what you are making and what is causing the caking, and we will suggest a shortlist to start from.
Moisture absorbers such as silicon dioxide (E551), calcium silicate (E552) and magnesium carbonates (E504) suit hygroscopic powders. Coating agents such as calcium and magnesium stearate (E470a, E470b) suit fats and sticky crystals. Ferrocyanides (E535, E536) are used only in salt and salt substitutes.
Common Anti-Caking Agents and Their Applications
A variety of anti-caking agents are approved for use in food, each with specific chemical properties.
Examples of Anti-Caking Agents in Food
| E-number | Agent | Typical applications |
| E551 | Silicon dioxide | Spices, seasonings, dairy and creamer powders |
| E552 | Calcium silicate | Salt, powdered mixes |
| E554 | Sodium aluminosilicate | Restricted use (see below) |
| E535 / E536 | Sodium / potassium ferrocyanide | Salt and salt substitutes only |
| E170 | Calcium carbonate | Powders, flour-based mixes |
| E504 | Magnesium carbonate | Salt, icing sugar |
| E470a / E470b | Calcium stearate / magnesium stearate | Tablets, powdered supplements |
| E341(iii) | Tricalcium phosphate | Salt, sugar, milk powders |
| E460(ii) | Powdered cellulose | Grated and shredded cheese |
Anti-caking agent E-number decoder
Look up an E-number or name to see what it is, how it works, where it is typically used and how to declare it on a label.
- E551 silicon dioxide (silica)
- E552 calcium silicate
- E554 sodium aluminium silicate (restricted use)
- E535 sodium ferrocyanide
- E536 potassium ferrocyanide
- E538 calcium ferrocyanide
- E170 calcium carbonate
- E504 magnesium carbonates
- E470a sodium, potassium and calcium salts of fatty acids (calcium stearate)
- E470b magnesium salts of fatty acids (magnesium stearate)
- E341(iii) tricalcium phosphate
- E460(ii) powdered cellulose
- E556 calcium aluminium silicate (no longer authorised)
- E559 aluminium silicate, kaolin (no longer authorised)
That table also covers the common E-number questions. E460 is cellulose, E535 is sodium ferrocyanide, E551 is silicon dioxide and E554 is sodium aluminium silicate.
Silicon Dioxide: Composition and Use
Silicon dioxide (E551) is a common agent used for its ability to absorb moisture and maintain flow. Silica occurs naturally, for example in mined diatomaceous earth [CHECK: cite a source]. The E551 used in food is a manufactured material, though. EFSA describes it as a synthetic amorphous silica with no crystalline structure and no surface coating or modification. There are two production routes: fumed silica, made by heating chlorosilanes such as silicon tetrachloride to very high temperatures, and precipitated silica, silica gel and hydrous silica, made by the wet method (EFSA, 2024).
Other Widely Used Anti-Caking Agents
Salt producers mostly use ferrocyanides. In EU law, E535, E536 and E538 are permitted only in salt and salt substitutes, at up to 20 mg/kg, individually or in combination, expressed as anhydrous potassium ferrocyanide [CHECK: confirm the same limit applies in GB]. Tricalcium phosphate is another option. You can see it in use in our salt with anti-caking agent E341.
Sodium aluminosilicate (E554) is more tightly restricted. EU limits on aluminium-containing additives removed E556 and E559, which were authorised only until 31 January 2014 (Regulation (EU) No 380/2012).
Safety and Health Considerations of Anti-Caking Agents
Are Anti-Caking Agents Like Silicon Dioxide Safe?
Yes. Under EFSA's current assessment, E551 is safe at the reported use levels. In its 2018 re-evaluation, EFSA's ANS Panel concluded that the available information was not enough to characterise E551 properly or to set an Acceptable Daily Intake (ADI). The follow-up opinion, published on 17 October 2024, found that E551 does not raise a safety concern for any population group at the reported uses and use levels, and that includes infants under 16 weeks.
EFSA did not set an ADI. It used a margin of exposure (MOE) instead and concluded that the MOE should be at least 36 for E551 not to raise a safety concern. It also recommended lowering the maximum limits for lead, mercury and arsenic in E551 and setting a limit for aluminium.
E551 is authorised in England, Scotland and Wales (FSA register). [CHECK: the FSA's own position on the 2024 EFSA opinion, and whether GB specifications have been amended.]
The Nanoparticle Question for E551
E551 contains particles at the nanoscale. Its primary particles are mostly between 2 and 28 nm and clump together into aggregates. EFSA identified three gaps in the data:
- no information on what proportion of E551 occurs in food as isolated nanoparticles, nano-sized aggregates or agglomerates
- absorption is likely to be very low but can't be measured precisely
- there are few toxicity studies that used proper dispersion protocols.
Common Concerns
Salt needs anti-caking agents because it picks up moisture from the air. Traces of hygroscopic impurities make this worse, and research on salt stability names hygroscopic impurities such as magnesium chloride as one cause. Without an agent, salt sets solid in the pack and won't dose accurately on a production line.
Some people distrust additives in general. Every agent in this guide has to be authorised under UK/EU rules and is reassessed when new data appears. Ferrocyanides are one example: EFSA's 2018 re-evaluation found them of no safety concern at the current authorised uses and use levels (EFSA, 2018).
Anti-Caking Agent FAQs for Food Manufacturers
That depends on the product and on which agents are authorised for that food category. The comparison table above gives typical applications. Check permitted uses and maximum levels in assimilated Regulation (EC) No 1333/2008 before you specify an agent.
Yes, at authorised levels. EFSA's 2024 follow-up to its 2018 re-evaluation found no safety concern for any population group. The conditions and data gaps are covered in the safety section above.
No. Iodisation and anti-caking are separate additions to salt. Iodised salt can carry both, with potassium iodate added alongside an anti-caking agent such as E536.
List the category name, then the specific name or E-number, for example "anti-caking agent: silicon dioxide" or "anti-caking agent: E551". Under Regulation (EU) No 1169/2011, Annex VII Part C, additives in these categories must be named by category, followed by their specific name or, where appropriate, their E-number.